![rtty interface rtty interface](https://www.qsl.net/gm0onx/ft10001.jpg)
![rtty interface rtty interface](https://www.mwf-service.com/shop/images/product_images/popup_images/6119.jpg)
Digital modes - Check your gain and ALC.This gave me a new com 1 & com 2 port, and disabled the old on-board port that was blown. Here's a pic from inside the computer, below the new add-on legacy com port card.
#Rtty interface serial
You might want to buy a computer that at least has an expansion port to allow for a serial port card with legacy ports for this.Īnyway, thanks again to Matthew Harris KD4PBS for the card to get my RTTY station back on the air! By controlling my RTTY shift through the FSK port, instead of using RTTY TX audio on USB like in DM780, I can use dedicated programs like MMTTY (love it!!) and work RTTY even in crowed contest band conditions. This interface board was designed for experimenting with RTTY, SSTV and other digital modes with my Yaesu FT-817ND transceiver using DroidRTTY and DroidSSTV. The majority of the digital mode interfaces that provide an output for FSK keying require a legacy serial or parallel port on the computer for this, and the majority of computers (esp laptops) have only USB ports and such, no physical 9-pin or 25-pin legacy ports. Even my old Yaesu FT-901's have dedicated FSK and sharp receive filters for this. Most HF rigs have a terminal in the aux port on the back of rig for FSK control. There are almost no USB-to serial port dongles that support the 5-bit stream or reprogramming to 45.5 baud for this, so a USB converter is almost out of the question. The smaller the capacitor, the faster interface switches to RX. The receiver can easily get overloaded and the waterfall gets washed out by strong stations on nearby frequencies. I had the same problem, so I swapped the two capacitors (C5 and C6) in the circuit diagram for the smaller ones.
#Rtty interface mod
This means you're unable to use your narrow RTTY or CW filters (since you're usually in USB mod for all digital modes).
![rtty interface rtty interface](https://raw.githubusercontent.com/4x1md/phone_rtty_interface/master/docs/images/external-connections.png)
While you can use soundcard software to work most digital modes (including RTTY), it typically doesn't allow for hard-keying the FSK port of your rig for true RTTY, and often doesn't allow for hard keying your rig for CW. Once I found the drivers for it, my old box was back up on RTTY.įor those of you who work digital modes, this is something to think about when you build or buy a computer. Thanks to Matt Harris KD4PBS, he had a spare plug-in card for my computer's PCI slot, to add on outboard serial ports! This provided the 9-pin legacy serial port I needed to get my RTTY hardware back working. I was stranded an d unable to use my RTTY interface on HF, after a near lightning strike blew the 9-pin serial port on my hamshack computer. From: RTTYgroups.io mailto:RTTYgroups.io On Behalf Of Bo W4GHV Sent: Friday, Octo2:04 PM To: RTTYgroups.io Subject: RTTY RTTY interface idea Thinking out loud.